Increased Accuracy for LED Lighting Measurements!
The Smart Quantum SQ-520 PAR Sensor is a USB powered sensor that will hook up to any PC or MAC allowing you to use your personal computer instead of an expensive dedicated monitor with the included 15 foot long USB cable. Hooking a sensor up directly to your computer allows you to easily log readings within the Apogee software or any application of your choice.
The SQ-520 Par Sensor has been specifically designed to give reliable and repeatable readings under LED lighting. With an increased spectral range, and larger sensing optic you will get more precise readings with all types of lighting systems. If you do not have a computer near your tank, don't worry, the SQ-520 can store up to 10,000 measurements internally and viewed later when powered by a stand-alone 5v USB power adapter like a battery pack or wall adapter.
Apogee has calibrated the SQ-520 with electronic lights making them perfect for any type of aquarium lighting. Calibration will be stored within the firmware of the sensor. The sensor has a housing designed to be fully weather-proof and self-cleaning allowing years of service with minimal maintenance.
No more days of looking and guessing how much light is being put into your tank. Apogee is the leader in radiation sensing devices and recently introduced the SQ-520 USB Powered Quantum PAR Sensor. With the easy to use software that can be downloaded, just as long as you have an open USB port on your Windows or MAC computer simply plug the USB sensor in, download the software and you are off and running
PAR (photosynthetic active radiation) is the easiest way to measure the available light for corals consume and use for photosynthesis. With LED lights giving more and more control to the consumer the best thing is a PAR meter that is affordable and simple to use. With PAR readings you can monitor light degradation, clarity of the water, and intensity of the lighting schedule. Most LED lights out on the market today have more power than what your corals can take and will quickly bleach out from too much light. By having a PAR meter to monitor the light intensity you will have tangible numbers to go off of, instead of just guessing.
Resolution - 0.1 Ámol m-2 s-1
Calibration Factor - custom for each sensor and stored in the firmware
Calibration Uncertainty - ▒ 5 %
Measurement Repeatability - less than 1 %
Response Time - software updates every second
Field of View - 180░
Spectral Range - 389 nm to 692 nm (wavelengths where response is greater than 50% of maximum)
Dimensions - 2.4 cm diameter and 3.7 cm height
USB Cable - 4.6 m (15 ft)
Current Draw (when Logging) - 5.1 mA
Warranty - 4 years
Software for mac and windows